White Bowl

Equipment Type Pressure Washer
Temperature 140° F Max
Inlet 3/4" FPT
Outlet 3/4" FPT
PSI 150 PSI Maximum @ 70° F
PSI 100 PSI Maximum @ 125° F
80 Mesh Screen
One of the major problems affecting the proper functioning of pressure washers is contaiminated water. By nature, water is a carrier of minerals, iron, dirt, rust, and other contaminants. Problems caused by this contamination could be clogging of the float tank, and pump inlet. The particles can get into the pump and cause wear on the packings and valves or crack the ceramic pistons. Unloaders are prone to damage if the water is not clean. Every pressure washer system, whether it is pulling water from a city water supply, water tank, stream or pond should have a quality water filter installed on the inlet side of the pump.

Equipment Type Pressure Washer
Temperature 140° F Max
Inlet 1 1/4" FPT
Outlet 1 1/4" FPT
80 Mesh Screen
One of the major problems affecting the proper functioning of pressure washers is contaiminated water. By nature, water is a carrier of minerals, iron, dirt, rust, and other contaminants. Problems caused by this contamination could be clogging of the float tank, and pump inlet. The particles can get into the pump and cause wear on the packings and valves or crack the ceramic pistons. Unloaders are prone to damage if the water is not clean. Every pressure washer system, whether it is pulling water from a city water supply, water tank, stream or pond should have a quality water filter installed on the inlet side of the pump.

Equipment Type Pressure Washer
Temperature 140° F Max
Inlet 1 1/4" FPT
Outlet 1 1/4" FPT
PSI 150 PSI Maximum @ 70° F
PSI 100 PSI Maximum @ 125° F
50 Mesh Screen
One of the major problems affecting the proper functioning of pressure washers is contaiminated water. By nature, water is a carrier of minerals, iron, dirt, rust, and other contaminants. Problems caused by this contamination could be clogging of the float tank, and pump inlet. The particles can get into the pump and cause wear on the packings and valves or crack the ceramic pistons. Unloaders are prone to damage if the water is not clean. Every pressure washer system, whether it is pulling water from a city water supply, water tank, stream or pond should have a quality water filter installed on the inlet side of the pump.

Equipment Type Pressure Washer
Temperature 140° F Max
Inlet 3/4" FPT
Outlet 3/4" FPT
50 Mesh Screen
PSI 150 PSI Maximum @ 70° F
PSI 100 PSI Maximum @ 125° F
One of the major problems affecting the proper functioning of pressure washers is contaiminated water. By nature, water is a carrier of minerals, iron, dirt, rust, and other contaminants. Problems caused by this contamination could be clogging of the float tank, and pump inlet. The particles can get into the pump and cause wear on the packings and valves or crack the ceramic pistons. Unloaders are prone to damage if the water is not clean. Every pressure washer system, whether it is pulling water from a city water supply, water tank, stream or pond should have a quality water filter installed on the inlet side of the pump.