Leaf Blowers Assembling the Blower Tubes on Husqvarna Handheld Leaf Blower

Published on March 13th, 2015 | by Turner Anderson


Assembling the Blower Tubes on a Husqvarna Handheld Leaf Blower

Watch our video on how to assemble the blower tubes on a Husqvarna handheld leaf blower.

Using the round blower tube nozzle will give you greater accuracy and a higher air stream. Using the wide high velocity nozzle will give you a wider air stream and greater air velocity.

Step 1:

Loosen the bolt clamp on the blower air outlet

Step 2:

Insert the upper tube into the outlet, you will need to align the notch so it fits properly, then tighten the clamp

Step 3:

Insert the lower tube onto the upper tube, alight the notch with the groove then twist it to the right to lock it.

Step 4:

If you want to shorten the length of the tube twist it to the left to unlock it, push the tube upwards towards the outlet and twist it tot the right to lock.

Jack’s Safety Tips: Before servicing or repairing any power equipment, disconnect the spark plug and battery cables. Remember to wear appropriate safety glasses and gloves to protect against harmful chemicals and debris. View our Disclaimer.

Featured Parts and Products:

Tags: , ,

About the Author

is the Internet Marketing Manager at Jack's and the editor of Jack's DIY Center. You'll also find him creating How-To articles, videos, newsletters, and much more.

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to Top ↑