Published on March 13th, 2015 | by Turner Anderson0
Assembling the Blower Tubes on a RedMax Backpack Leaf Blower
Watch our video on how to assemble the blower tubes on a RedMax backpack leaf blower.
If there are cracks or holes in any part of the blower tubes, the efficiency and blowing capacity of your machine will suffer.
Insert the short elbow tube directly into the blower and attach the swivel tube to it with a metal clamp
slide the middle tube into the swivel tube, do not clamp it yet
Slide the throttle handle onto the middle tube and secure the bolt through the throttle bracket and attach the nut on the other side of the bracket to hold the throttle handle onto the tube
Attach the throttle cable to the clip on the swivel tube
Tighten the clamp around the swivel and middle tubes
Attach the lower tube by aligning the notch with the tube insert, turn it left to lock it in place, repeat the same process for the end tube
Jack’s Safety Tips: Before servicing or repairing any power equipment, disconnect the spark plug and battery cables. Remember to wear appropriate safety glasses and gloves to protect against harmful chemicals and debris. View our Disclaimer.
Featured Parts and Products:
- Model: RedMax EBZ5150RH Backpack Leaf Blower
- End Tube: 515705501 – end
- Straight Middle Tube: 577079301 – straight
- Throttle Tube: 275051201 – throttle tube swivel joint
- RedMax Leaf Blower Parts
- New RedMax Leaf Blowers