Changing the oil in your tiller is a quick and easy to keep your engine running in top condition!
In case you don't know how to change the oil, here are a few steps to help you out!
Place the tiller on level ground
Clean the area around the oil fill plug
Remove the plug
The oil should be to the point of almost overflowing, check owner’s manual for approximate capacity
To remove the oil, remove the drain plug and tip the tiller forward
After the oil has drained completely replace the oil drain plug and tighten securely
Clean the area around the oil fill and remove the plug carefully-be sure not to let any dirt get into the engine
Using a funnel refill the engine with oil
Recheck the oil level to be sure it has been fueled sufficiently
Re-insert the plug and tighten
Changing the oil is a great way to keep your tiller's engine healthy!
Be sure to check your owner's manual to find out what kind of oil you need for your tiller and how often you should be changing it!
Jack's Safety Tips: Before servicing or repairing any power equipment, disconnect the spark plug and battery cables. Remember to wear appropriate safety glasses and gloves to protect against harmful chemicals and debris. View our Disclaimer.