Lawn Mowers

Published on July 31st, 2017 | by Kyle E

0

How to Install and Remove the Grass Bag for an Ariens Razor Walk-Behind Lawn Mower

The following instructions are for the Ariens Razor Walk-Behind Lawn Mower, which is for the model number 911175. Before attempting to work on/with your equipment in any way, always refer to your owner’s manual for safety information.

Installing Grass Bag

  1. Shut off the unit.
  2. Make sure the mulch cover is closed.
  3. Lift the rear door and remove the mulch plug, if necessary.
  4. Hook the grass bag frame onto the bag mount.
  5. There should be no openings between the bagger and mounting surface after installing the bag. If necessary clear debris from the bag mounting surfaces.

Grass Bag Removal

  1. Shut off the unit.
  2. Use the handle to lift and remove the grass bag.
  3. Install the mulch plug.
  4. Close the rear door.
  5. Notice: Empty the grass bag and clean the mower pan after each use. DO NOT allow grass clumps or a grass coating to collect inside the grass bag or mower pan. Remove the grass bag from the mower, wash the bag with a hose and allow it to dry.

For information about safety, warranty, and your specific model, read and be familiar with your owner’s manual.

Related Products and Links


About the Author





Leave a Reply

Your email address will not be published. Required fields are marked *

Back to Top ↑