Tillers How to Install the Digging Tines on a Honda FG110 Mini Tiller

Published on May 7th, 2015 | by Kimberly Myers


How to Install the Digging Tines on a Honda FG110 Mini Tiller

Did you get digging tines for your tiller but aren’t quite sure how to install them?

If you have any doubts on how to get them onto your tiller, here are some steps to help you out!

Step 1:

Turn off the engine switch.

Step 2:

Disconnect the spark plug wire.

Step 3:

Remove the fan cover.

Step 4:

Slide on the first tine with the hub facing away from the transmission.

Step 5:

Install the second tine with the hub facing in.

Step 6:

Install one of the supplied spacers onto the end of the drive shaft.

Step 7:

Secure the tines with one of the provided lock pins.

Step 8:

Repeat steps 7-9 on the other side.

Step 9:

Reconnect the spark plug.

Step 10:

Re-install the fan cover.


Your new tines are installed! Now get digging!

Featured Parts & Products:

Jack’s Safety Tips: Before servicing or repairing any power equipment, disconnect the spark plug and battery cables. Remember to wear appropriate safety glasses and gloves to protect against harmful chemicals and debris. View our Disclaimer.

Tags: , , , ,

About the Author

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to Top ↑