Snow Blowers Husqvarna Single Stage Snow Blower Oil Change

Published on February 3rd, 2015 | by Turner Anderson


Husqvarna Single Stage Snow Blower Oil Change

Does your Husqvarna Single Stage Snow Blower need an oil change? Following a regular oil change schedule can keep your snow blower running properly all winter long. Prepare your snow blower for the next big snow storm by staying up to date on your maintenance schedule

It is recommended to change the oil in your Husqvarna Single Stage Snow Blower every 25 hours of use or once a season, whichever comes first.

Before starting, refer to your owner’s manual for your snow blowers oil change schedule, the oil recommended for your snow blower, and any specific tools needed for your snow blower model.

Tools Needed:

*Before servicing your snow blower make sure the snow blower is turned off and remove the ignition key to reduce the risk of accidental start-up.

Changing the Oil

1) Warm the Engine

To drain the oil easier, turn on the engine and allow it to warm for a few minutes. Once the oil is warmed, shut off the engine and allow it to cool before servicing your engine.

2) Locate Oil Drain Tube

Place oil drain pan

Husqvarna Single Stage Snow Blowers allow you to drain the oil through the oil drain plug, or the oil drain tube.

3) Oil Drain Pan

Place oil drain pan

Place an oil drain pan under the oil drain tube to catch the oil as it falls.

4) Remove Oil Drain Tube Cap

Oil drain tube

5) Drain Oil

Drain the Oil

Tip the snow blower backwards to drain the oil.

6) Reinstall Oil Drain Tube Cap

Reinstall oil drain cap.

7) Remove Oil Dipstick

remove oil dipstick

8) Refill With New Oil

Refill with new oil.

Place a funnel in oil fill tube and refill with 5W-30 oil until it reaches the "Full" mark.

9) Check Oil Level

Refill with new oil.

After refilling, and before and after every use, check the oil level by looking at the lines on the oil dipstick.

10) Reinstall Oil Dipstick

Reinstall oil dipstick.

Twist the oil dipstick back into the oil fill tube and clean up any excess oil.

11) Check for Leaks

Start the engine for a few minutes and check for any leaks.


Follow an oil change schedule to keep your snow blower running properly all winter long. Check your oil before and after each use to make sure you have the correct amount in your snow blower. Damage can occur if your snow blower is running on low or no oil.

Prolong the life of your engine and keep your snow blower prepared for the next snow storm by performing regular oil changes.

Jack’s Safety Tips: Before servicing or repairing any power equipment, disconnect the spark plug and battery cables. Remember to wear appropriate safety glasses and gloves to protect against harmful chemicals and debris. View our Disclaimer.

Featured Parts and Products:

Tags: , ,

About the Author

is the Internet Marketing Manager at Jack's and the editor of Jack's DIY Center. You'll also find him creating How-To articles, videos, newsletters, and much more.

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to Top ↑