DIY for Simplicity

Simplicity

Featured Simplicity DIY Articles & Videos


Simplicity DIY Articles & Videos

Simplicity Parts




27 Responses to Simplicity

  1. robert spear says:

    carb ajustment specks ,what are they

  2. george burski says:

    I recently bought a old simplicity lawn tractor and it needs to be tuned up badly. The mower deck turns but is not on the mower. Needs new belts.possible battery. Its a classic and would really like to use it this summer. Sand it down and paint it.any idea on a price

  3. John McGrath says:

    Any tips on changing the drive belt on a Simplicity Broadmoor?
    I can’t break the bolt loose on the clutch pulley.

    • Raymond C CHRISTENSEN says:

      I bit the bullet and bought an impact wrench for $70. Had 220 ft/lbs torque. Bolt came out instantly. Tried holding motor, and other things they all failed.

  4. Lee says:

    I have a Simplicity Snowblower model 11570E, mfg no. 1694849. The remote deflector control know will not turn as I cannot push or pull it. (It appears to be frozen). Is there a way to fix this or must I purchase a replacement knob and cable:? Thank you.

  5. jim says:

    I have a simplicity zero turn . main problem is with new battery after about 3 to 4 times using mower it gets hard to start and the mower blades when turned off will not restart . need help what could be the problem model 1694455, engine model358777-0280-e1

    • Gerard Teravest says:

      Try to test the stator i had that with my john deer if that is a electric pto if ur battery is not produceing the right power ur clutch will not engage

  6. Mike says:

    Looking for how to replace drive belt on a snapper/simplicity mower. It’s a hydro drive and it looks like I need to pull the steering column to get the belt on.

  7. Ray Lopez, Sr. says:

    I have a simplicity 860 snow blower. I can compress auger drive leaver but blades won’t turn.
    Linkage has been adjusted per manual.

  8. BILL SHELDON says:

    I have 1973 RD1973 SIMPLICITY 19 H.P. ONAN IT HAS THE AUTO TRANS WITH A MANUAL CLUTCH #964002512. MOTOR STARTS AND RUNS BUT TRACTOR WILL NOT MOVE THE HDY FLUID IS FULL ALSO THE REAR P T O DOES NOT OPERATE. WOULD THAT BE THE HDY PUMP HOW COULD IS BE TESTED.

  9. Kendall McManus says:

    The company I work for has A Simplicity model 27h I sure could use the owners manual and
    parts list. Serial number is 2000754306. Any help would be greatly appreciated!

  10. tom says:

    how to remove driveshaft pulley from kohler command 16 vertical shaft single cyclinder engine

  11. Doug says:

    Simplicity riding mower. Was mowing today and struck some brick edging. (Have done this before). The mower deck blades stopped immediately. Turned the switch to engage the blades and it only clicked. What can I do. Self fix or to the shop.

  12. Bill says:

    Hi,
    A couple of days ago when I was mowing It threw the belt. The belt appears to be still good. I am not familiar with the layout of the belt on the flywheels. Can I get a new manual and if not shown in the manual, a blueprint to see the layout of the belt ( when on ).
    It is a 2006 Simplicity Riding Mower, Model # 2690437. There are also these #’s 447295 on the key tag on the key ring. Any help would be appreciated. Thank you in advance.

  13. Dave says:

    Bought a simplicity regent used. Everything works great…..except… forward pedal is reverse. Reverse pedal is forward. Wired thing is the casing does not look like it has been opened.

  14. ANITA says:

    MY SIMPLICITY ZERO TURN KEEPS DIEING, IT WILL START BACK UP BUT THEM DIES AGAIN AFTER MOWING FOR A A SHORT TIME?

  15. joe says:

    regent 12hp hydro. i drained the hydro pump cuz oil was black and i dont think it was ever changed.filled it with 30 weight oil. pushed back n forth to work out bubbles then added to full level. next morning it only moved forward. in reverse i heard noise in trans but no movement. cut 200 feet thinking maybe it would build pressure or work air out. turned n stopped. it wont move forward now. i can hear same sound in forward n reverse now.pushed it in garage n went to work. also i didnt see the cooling fan move when stopped. how do i figure out whats wrong with it? per diagram i drained it thru the bottom check valve. help!

  16. Andre says:

    I have an older (mid 1990s) Simplicity garden tractor 20hp Kohler engine. I’d like some instructions on how to install the front mount clutch. Is there anyone that can help me?

  17. ron dutcher says:

    i have a simplicy mower model 7016 am putting it back together again baught it in pices can i find a manual to show belt diegrams sure would halp out

  18. WORTH HURLBUT JR. says:

    I have a simplicity band-saw mill, it has a 14h.p. briggs-Stratton vanguard v-twin motor!! I had a problem with sand in the fuel line. cleaned the tank and carburetor, also replaced the fuel filter. the problem is when I start the motor , it revs wide open and I can not idle it down with the throttle !! I can not move the governor rod when the motor is running .could it be that the governor gear or the fly weights are malfunctioning?? does the governor need adjusting and how do I adjust it??

  19. Barbara Arroyo says:

    simplicity tractor model 28q777 is leaking gas at solenoid fuel. how do I take the old one off to replace it?

  20. John Loftin says:

    What oil should be used for trans in hydro regent 15.And what is the capacity…

Leave a Reply to Barbara Arroyo Cancel reply

Your email address will not be published. Required fields are marked *

Back to Top ↑