Snow Blowers Snow Blower Tune UP

Published on November 11th, 2015 | by Turner Anderson

2

Snow Blower Tune-Up Checklist

Stop! Before you start your snow blower, let’s review some basic tune-up procedures

*This is a basic snow blower tune-up checklist with popular procedures. Always refer to your owner’s manual for manufacturer specific tune-up recommendations.

Click to Download & Save

snowblower-tuneup

Featured Parts:

Tags: ,


About the Author

is the Internet Marketing Manager at Jack's and the editor of Jack's DIY Center. You'll also find him creating How-To articles, videos, newsletters, and much more.





2 Responses to Snow Blower Tune-Up Checklist

  1. Frank says:

    A question about my snow thrower. It wouldn’t start so I drained all the gas put new gas in, cleaned the carb and changed the sparkplug. Now when I spray carb cleaner in the carb and pull it. It fires in a pull. When I reassemble everything. It does nothing.
    Please help.

  2. Tim says:

    When you cleaner the carb did you remove the float bowl? Maybe the float is stuck closed not allowing gas the full the bowl. Have you adjusted the idle mixture? A basic method is turn it clockwise until you feel it seat (don’t be in a rush as you can cause problems if you “crank down” on it. Once you feel it touch then go counter clockwise about 1-1/2 turns.
    if you didn’t do a full cleaning the jet(s) could be plugged.

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to Top ↑