My Account | My Garage | Commercial/Dealer Login | Order Status |
Contact Customer Support
M-F: 9am-6pm ET
Sat: 9am-5pm ET
| 1-877-737-2787
Shopping Cart

Over 1,000,000 Orders Shipped Since 1997!

1441 1/2" X 1/2" MPT High Limit Switch

Barens 1441 1/2" X 1/2" MPT High Limit Switch

Part#:  1441
There are no reviews at this time.
Barens OEM Part



1/2" X 1/2" MPT High Limit Switch

Fits Model


Also Fits Model


Replaces OEM



Temperature 320°F
Color Red
Size 1/2" Conduit X 1/2" MPT
A High Temperature Limit Switch is used on hot water pressure washers to prevent excessive water temperature. The switch is a bi-metallic, non-adjustable thermostat. When the bi-metallic sensor expands and bends, it breaks an electrical circuit when the water reaches a pre-set temperature. When the switch cools, the metal contracts and the circuit is again completed.
The sensor consists of two strips of metal bonded together. The strips expand at different rates when the temperature increases. The differing expansion rate of the two metals allows the sensor to bend. Normally the bi-metallic sensor will touch another contact. The control circuit runs through this connection. As the temperature rises, the bi-metallic sensor bends away from the contact and the circuit is broken, cutting power to the fuel solenoid.
NOTE: The thermostat will not reset until all areas surrounding the part cool down. This may result in a temperature drop of up to 50 degrees before the thermostat resets and starts the burner.
25 amp
Volt 110 Volt
Equipment Type Pressure Washer

Customer Reviews for the 1/2" X 1/2" MPT High Limit Switch

There are no reviews for this product at the time.

Questions & Answers for the Barens 1441

Ask us about the Barens 1441 1/2" X 1/2" MPT High Limit Switch. Please no repair questions. Your Q&A may be posted to to help other shoppers, like you, with their purchasing decisions. Thank you.

Repair Tips For Barens 1441

No repair tips at this time.

back to top