My Account | My Garage | Commercial/Dealer Login | Order Status |
Contact Customer Support
M-F: 9am-6pm ET
Sat: 9am-5pm ET
| 1-877-737-2787
Shopping Cart

Over 1,000,000 Orders Shipped Since 1997!

1958 1.8mm Adjustable Acid Injector

Barens 1958 1.8mm Adjustable Acid Injector

Part#:  1958
There are no reviews at this time.
Barens OEM Part



1.8mm Adjustable Acid Injector

Fits Model


Also Fits Model


Replaces OEM

JE Adams


Temperature 194°F
Inlet 3/8" MPT
Size 1.8mm
Draw rate 0 to 20%, Ceramic ball for injecting acids
Downstream injectors are installed after the pump. In order to function, the pressure must be lowered with the use of either a dual lance and soap nozzle, a variable nozzle, a dual nozzle holder, or an adjustable nozzle holder. Water enters the inlet of the injector and creates a venturi which drops the pressure and suctions the chemical from container. Chemical can be injected either in concentrated form or in diluted form. Chemical can be regulated by turning the dial on the injector or installing a metering device on the chemical line. The injector contains a check valve to prevent water from flowing into the chemical container while in high pressure mode.
Minimum 35% pressure drop for draw
1/4" Hose Barb Chemical Port
Note: Length of hose will determine ability of injector to work properly. It is recommended to keep hose length at 100 feet or less
Gallons Per Minute 2-3
Outlet 3/8" MPT
PSI 3000

Customer Reviews for the 1.8mm Adjustable Acid Injector

There are no reviews for this product at the time.

Questions & Answers for the Barens 1958

Ask us about the Barens 1958 1.8mm Adjustable Acid Injector. Please no repair questions. Your Q&A may be posted to to help other shoppers, like you, with their purchasing decisions. Thank you.

Repair Tips For Barens 1958

No repair tips at this time.

back to top