My Account | My Garage | Commercial/Dealer Login | Order Status |
Contact Customer Support
M-F: 9am-6pm ET
Sat: 9am-5pm ET
| 1-877-737-2787
Shopping Cart

Over 1,000,000 Orders Shipped Since 1997!

2044 ROBOKIM #3 Adjustable Chemical Injector

Barens 2044 ROBOKIM #3 Adjustable Chemical Injector

Part#:  2044
There are no reviews at this time.
Barens OEM Part



ROBOKIM #3 Adjustable Chemical Injector

Fits Model


Also Fits Model


Replaces OEM

General Pump


Note: Length of hose will determine ability of injector to work properly. It is recommended to keep hose length at 100 feet or less.
Temperature 210° F Maximum
Inlet 3/8"mpt
Will draw between 125 & 250 PSI only
Refer to the arrow on the injector body for proper flow direction. Install the injector in the system downstream of the regulator unloader which is downstream of the pump. These injectors will draw your chemical into the water stream at 125 PSI and 2.1 to 10.8 GPM, through your low pressure nozzle. Injector WILL NOT draw chemical above 250 PSI through your high pressure nozzle. The amount of chemical drawn in is controlled with the adjustment knob.
Downstream injectors are installed after the pump. In order to function, the pressure must be lowered with the use of either a dual lance and soap nozzle, a variable nozzle, a dual nozzle holder, or an adjustable nozzle holder. Water enters the inlet of the injector and creates a venturi which drops the pressure and suctions the chemical from container. Chemical can be injected either in concentrated form or in diluted form. Chemical can be regulated by turning the dial on the injector or installing a metering device on the chemical line. The injector contains a check valve to prevent water from flowing into the chemical container while in high pressure mode.
Gallons Per Minute 5.6 - 10.8
Spec 1.0" x 2.7" x3.1"
Outlet 3/8"mpt
Material Brass
Equipment Type Pressure Washer
PSI 3200

Customer Reviews for the ROBOKIM #3 Adjustable Chemical Injector

There are no reviews for this product at the time.

Questions & Answers for the Barens 2044

Ask us about the Barens 2044 ROBOKIM #3 Adjustable Chemical Injector. Please no repair questions. Your Q&A may be posted to to help other shoppers, like you, with their purchasing decisions. Thank you.

Repair Tips For Barens 2044

No repair tips at this time.

back to top