My Account | My Garage | Commercial/Dealer Login | Order Status |
Contact Customer Support
M-F: 9am-6pm ET
Sat: 9am-5pm ET
| 1-877-737-2787
Shopping Cart

Over 1,000,000 Orders Shipped Since 1997!

2642 4.5 Brass Nozzle Sand Blast Kit

Barens 2642 4.5 Brass Nozzle Sand Blast Kit

Part#:  2642
There are no reviews at this time.
Barens OEM Part



4.5 Brass Nozzle Sand Blast Kit

Fits Model


Also Fits Model


Replaces OEM



Temperature 190° F
Designed for sandblasting of various surfaces. This sand blast kit removes most coatings down to white metal, grafitti clean up, and paint surface preparation. Experiment with the various pressures on your machine and the grade of sand to determine which will give the best results.Installation Instructions 1. Install male pipe thread into the outlet of trigger gun. If using teflon tape as a sealant, make sure to get no tape inside the pipe, as it may clog the high pressure water nozzle. 2. Insert the probe into bag, bucket, or pile of sand. MAKE CERTAIN THE OPPOSITE END OF THE SHORTER TUBE IS NOT COVERED BY SAND. This is a breather tube and performance will be affected dramatically if this tube is obstructed 3. Turn adjustment knob fully clockwise for maximum sand flow
Gallons Per Minute 8
Nozzle Size 4.5
Material Brass
Includes Carbide Tip, 24" Wand, 25 Feet of Polybraid Hose
Equipment Type Pressure Washer
PSI 3650

Customer Reviews for the 4.5 Brass Nozzle Sand Blast Kit

There are no reviews for this product at the time.

Questions & Answers for the Barens 2642

Ask us about the Barens 2642 4.5 Brass Nozzle Sand Blast Kit. Please no repair questions. Your Q&A may be posted to to help other shoppers, like you, with their purchasing decisions. Thank you.

Repair Tips For Barens 2642

No repair tips at this time.

back to top