JavaScript Disabled - Unable to show Cart
There are (88) parts used by this model.
- Found on Diagram:
A/C Components
-
-
14067050
RECEIVER DRIER
Diameter: 4" Length: 7 1/2" Inlet: 3/8" FO Outlet: 3/8" MIO Sight Glass: Side (2)
$41.07
-
16067006
RECEIVER DRIER
Diameter: 3" Length: 8 1/2" Inlet: 3/8" MIO Outlet: 3/8" MIO Sight Glass: Side
$73.59
- Found on Diagram:
Clutch, Transmission & PTO Components
-
14121011
PTO SHAFT
2 Speed PTO Stub Shaft (540/1000 RPM), LOA: 9.20", 6 x 30 x 21 spline.
$145.11
-
14121017
PLANETARY PLATE
ID: 9 3/8" (238mm), OD: 13 11/16" (347mm) including 4 tabs.
$54.08
-
14125002
BEARING
ID: 1.772" (45.008mm), OD: 2.953" (75.006mm), W: .63" (16.002mm)
$32.51
-
-
14126003
CLUTCH DISC
ID: 5 1/8" (130mm) with 42 teeth, OD: 7 3/4" (197mm).
$34.56
-
14126004
CLUTCH DISC
ID: 4 7/8" (125mm) with 50 teeth, OD: 8 5/8" (225mm).
$49.75
-
14126006
CLUTCH DISC
Planetary Brake, ID: 8 7/8" (225mm) 87 spline, OD: 11 1/2" (292mm), Thk: 13/64" (5.2mm)
$57.63
-
14126016
CLUTCH DISC
ID: 4 7/16" (113mm) w/ 54 teeth, OD: 11 3/16" (285mm)
$66.09
-
14126017
CLUTCH DISC
ID: 9 3/16" (240mm) w/ 95 teeth, ID: 11 5/8" (295mm)
$43.24
-
14126023
PTO DISC
ID: 1 1/8" (28mm) w/ 19 teeth, OD: 4 5/16" (110mm)
$36.74
-
14126024
CLUTCH PLATE
ID: 3 7/8" (99mm), OD: 5 5/8" (143mm) includes 10 tabs.
$17.23
-
14126033
CLUTCH PLATE
ID: 4 1/2" (140mm), OD: 9 7/8" (251mm) includes 12 tabs.
$50.04
-
14126044
CLUTCH PLATE
ID: 5 7/16" (138mm), OD: 8 1/2" (216mm) includes 12 tabs.
$33.14
-
14126050
CLUTCH PLATE
ID: 4 5/8" (118mm), OD: 8 1/2" (216mm) includes 12 tabs.
$33.57
-
14126052
CLUTCH PLATE
ID: 3 7/8" (99mm), OD: 5 5/8" (143mm) includes 10 tabs.
$34.23
- Found on Diagram:
Cooling System Components
-
-
-
14066301
RADIATOR
OVERALL HEIGHT: 23 7/8", OVERALL WIDTH: 20 3/4", CORE HEIGHT: 20 1/4", CORE WIDTH: 20", DEPTH: 2 1/2", ROWS: 4 FINS PER INCH: 8, INLET: 2 3/8", OUTLET: 2 3/8". Aluminum core.
$887.55
-
-
14066550
PULLEY
Tensioner pulley, roller (To s/n 159438)
$56.36
-
14066551
PULLEY
Belt tensioner roller (S/N 159439 on)
$76.08
- Found on Diagram:
Electrical Components
-
14000100
STARTER
12v, 10 tooth, Direct Drive Bosch type unit. 3.0KW, two (2) bolt mount. Uses Atlantic 1400-0203 solenoid and Atlantic 1400-0300 drive. Uses correct 13.5mm mounting hole diameter on DE.
$251.46
-
14000154
STARTER
OSGR Replacement Starter for 1400-0100. 12V, CW, 10 Tooth
$228.80
-
14000195
STARTER
12v, 3.4kw, 10 tooth, clockwise, PLGR, OE Iskra (Mahle)
$557.21
-
14000203
SOLENOID
12v, three (3) terminal, Bosch type for DD starters. Mount w/three (3) screws.
$40.43
-
14000501
ALTERNATOR
12v, I/R, 55 amp Bosch type w/o pulley. Uses B+ post, D+ post, and W terminal spade.
$236.06
-
14000514
ALTERNATOR
12v, I/R, 120 amp, Bosch type w/o pulley, B+ and D+ post, W spade.
$225.32
-
14000590
ALTERNATOR
12v, 55a, IR, EF, clockwise, Bosch style, clock position: 12
$151.09
-
-
14000940
RELAY
12v, 4-terminal. 5/16-18 contact terminals. 10-32 switch terminal, 8-32 ignition terminal. Copper contact terminals w/grounded base w/phenolic material housing, suppression diode installed for electronic circuit protection.
$16.59
-
14000945
No Longer Available
- Found on Diagram:
Engine Components
-
-
-
-
-
-
-
-
-
-
14095100
FLYWHEEL W/RING GEAR
Fits with 12", 12-5/8" and 12-7/8" Pressure Plate Assemblies. Flywheel has 13" I.D and does come with Ring Gear. Flywheel ring gear w/142 teeth, OD is 14.325" by ID of 13.370" by Width of .406" replaces ref#T20088.
$584.94
-
-
14095500
RING GEAR
Flywheel ring gear w/142 teeth, OD is 14.325" by ID of 13.370" by Width of .406". Replaces ref#T20088, used w/flywheel ref#RE18678.
$46.71
-
- Found on Diagram:
Filters
-
AF3230
AIR FILTER
This filter is currently available in Baldwin brand; set of two
$105.99
-
-
-
HF1409
LUBE FILTER
OD: 3-3/4 (95.3), Length: 9-19/32 (243.7), Thread: 1-3/8 x 12 UNF. Lube filter for diesel and gas applications.
$43.24
-
-
OF3103
LUBE FILTER
Features: 20 PSID By-Pass Valve. Lube filter for diesel and gas applications.
$6.28
- Found on Diagram:
Front Axle & Steering Components
-
14041004
SPINDLE
LH/RH, pivot shaft 9.3" (236mm) long
$408.17
-
-
-
14041031
TIE ROD END
LOA: 26.25" (666.75mm), OD: 1.25" (31.75mm)
$314.79
-
14041036
TUBE
LOA: 38 1/4", ID: M24 x 2.0 female RH thread
$110.55
-
14041064
AXIAL JOINT
8.20", M22 X 1.5 RH Thrd, M24 X 1.5 RH Thrd
$112.62
-
-
14041077
TIE ROD END
LOA: 10", ID: M24 X 1.5 RH Thread, right side
$194.98
-
-
-
-
-
14042005
RETAINER, BEARING
Wear Sleeve, hub bushing. OD: 2.036" (51.7mm), ID: 1.624" (41.4mm) W: .236" (6.32mm)
$5.62
-
-
-
-
-
-
-
-
-
14044804
STEERING WHEEL
Brown leather wrapped, 36 Splines, 3 Spoke style, 16" Diameter
$161.70
-
- Found on Diagram:
Fuel System Components
-
-
-
-
14033702
INJECTOR
Pencil type injector for 300 series motors, Stamped Id # 28485.
$57.02
- Found on Diagram:
Hitch and Implement Components
-
14130002
LIFT LINKAGE
Three point hitch top link category 2 with ball and hook ends, Cat ll, min 20.86"-max 28.54".
$357.12
- Found on Diagram:
Muffler
-
-
14173813
MUFFLER
RH, 13.25"H x 9.25"W x 7" D, Inlet is 2.5" ID, Outlet is 2.5"OD
$394.52
- Found on Diagram:
Sheet Metal and Grille
-
-
14119003
GAS STRUT, ROOF HATCH
Gas Spring (Roof Hatch). LOA: 517mm, Stroke: 217mm, Force: 200N, Cyl Dia: 18mm, Rod Dia: 8mm. Ball and socket ends.
$18.96
-
14119005
GAS STRUT
Gas Spring. LOA: 495mm, Stroke: 195mm, Force: 150N, Cyl Dia: 21mm, Rod Dia: 8mm. Ball and socket ends.
$32.51
-
14119007
GAS STRUT
Gas Spring (Door). LOA: 250mm, Stroke: 75mm, Force: 350N, Cyl Dia: 18mm, Rod Dia: 8mm.
$34.56
- Found on Diagram:
Wheels, Hubs and Components
-
14080001
HUB
2WD wheel hub, implement hub, 8 hole pattern
$115.58