Replacing the Scraper Blade on a Simplicity Two Stage Snow Blower
Watch our video on how to replace the scraper blade on a Simplicity two stage snow blower.
The scraper blade scrapes the surface of snow and ice underneath your snow blower, since the augers don’t come into contact with the ground. After constant use, the scraper blade can wear down.
Step 1:
Remove the ignition key
Step 2:
Tilt the snow blower back so it rests on the handles
Step 3:
Remove the 4 bolts that attach the scraper bar to the auger housing
Step 4:
Align holes of new blade with the holes on the auger housing, insert and tighten the bolts
Jack’s Safety Tips: Before servicing or repairing any power equipment, disconnect the spark plug and battery cables. Remember to wear appropriate safety glasses and gloves to protect against harmful chemicals and debris. View our Disclaimer.
Featured Parts and Products:
- Model: Simplicity I1224E
- Scraper Blade: 1738301AYP
- Simplicity Snow Blower Parts
- New Simplicity Snow Blowers
About the Author
Turner Anderson is the Internet Marketing Manager at Jack's and the editor of Jack's DIY Center. You'll also find him creating How-To articles, videos, newsletters, and much more.
Related Posts
How to Adjust the Skid Shoes and Auger Control on Your Cub Cadet Two Stage Snow Thrower →
How to Test and Adjust the Drive Control on Your Cub Cadet Two Stage Snow Thrower →
How to Assemble the Handle and Chute on Your Cub Cadet Two Stage Snow Thrower →
How to Replace the Auger Belt on Your Cub Cadet Two Stage Snow Thrower →
